Skip to content
Render tools
Turn image 1 (a 3D model screenshot) into a photorealistic architectural photograph. Keep the geometry, building massing, camera position, perspective, window positions and proportions of image 1 EXACTLY unchanged. Use image 2 only as reference for materials, colours, light and atmosphere – do NOT copy its balconies, loggias or building shape.

Turn image 1 (a 3D model screenshot) into a photorealistic architectural photograph. Keep the geometry, building massing, camera position, perspective and the position and proportion of every opening of image 1 EXACTLY unchanged. Use image 2 only as reference for materials, colours, light and atmosphere – do NOT copy its projecting balconies or building shape.

Geometry to preserve from image 1: a three-storey cubic residential building with a flat roof and sharp edges, no projecting elements, no roof overhang. The long facade has a strict grid of openings that alternate between WINDOWS and RECESSED LOGGIAS. Openings with diagonal lines in image 1 are windows; openings without diagonal lines are loggias – deep recesses cut into the volume, about 1.5 m deep, with a visible back wall, side walls, ceiling and floor in shadow. Ground floor and first floor, six axes from left to right: window, loggia, window, loggia, window, wide corner loggia. Top floor is set back at the left end and has five axes: loggia, window, loggia, window, wide corner loggia. Windows and loggias are stacked vertically above each other. Each loggia has a parapet of vertical wooden slats flush with the facade plane. The short facade on the right is fully covered by a dense full-height screen of vertical wooden slats. The building stands on a raised plot enclosed by a low curved concrete retaining wall that wraps around the right side in a rounded loop. A small rectangular light well sits in front of the long facade at ground level.

Materials from image 2: facade clad in vertical untreated spruce boards, light natural wood tone with slight silvery weathering and subtle board variation; thin horizontal metal flashing joints at each floor level. Loggia interiors lined with the same spruce boards, slightly warmer and less weathered because they are sheltered, with glazed doors and windows in the loggia back walls. Windows in the facade: natural wood frames, clear glass reflecting sky and trees, some with dark external louvre blinds partly lowered. Vertical slat screen and loggia parapets in the same untreated spruce. Retaining wall in smooth light-grey exposed concrete. Grass and low planted shrubs inside the wall, light concrete pavers and asphalt outside.

Do not draw the diagonal lines – they are only opening symbols. Replace the low-poly trees with realistic deciduous trees (lime or maple) in exactly the same positions and sizes: a smaller tree on the left, a large tree in front of the right corner. Remove the axis gizmos.
Materials from image 2: facade clad in vertical untreated spruce boards, light natural wood tone with a slight silvery weathering and subtle board variation; thin horizontal metal flashing joints at each floor level; window frames in natural wood, clear glass with realistic reflections of sky and trees, some windows with dark external louvre blinds partly lowered. Vertical slat screen in the same untreated spruce. Retaining wall in smooth light-grey exposed concrete. Ground: grass and low planted shrubs inside the wall, light concrete pavers and asphalt outside.

Replace the low-poly trees with realistic deciduous trees (e.g. lime or maple) in exactly the same positions and sizes: a smaller tree on the left, a large tree in front of the right corner. Ignore the diagonal lines inside the windows – they are opening symbols, not mullions. Remove the axis gizmos.

Create renders like this

Turn any photo, sketch, or floor plan into a photoreal render in seconds.