Skip to content
Render tools
Edit the uploaded image locally. Make only these two changes:

Enlarge the photovoltaic arrays on ALL FOUR main roofs. In this top-down image, the longitudinal ridge is the exact horizontal centreline of each rectangular roof. Move the upper edge of every PV array UP to this centreline. Extend its lower edge to just short of the lower eave. The panels must cover almost the entire LOWER HALF of each main roof, across its full length, with only narrow edge margins. Do not leave vegetation between the panels and the centreline. Keep the UPPER HALF as green sedum roofing. Preserve the roof geometry.
Replace the small narrow paved connection from the LEFT public street to the left end of the UPPER-LEFT building, immediately ABOVE the parking entrance, with continuous natural grass matching the adjacent lawn. Remove only this small path. Keep the main vehicle entrance and all other paths unchanged.
Preserve everything else exactly: the tapered site boundary, continuous right boundary hedge, four building footprints, gardens, trees, internal parking spaces and cars, empty public street, lighting, fine textures and image framing. No redesign or new elements.

Create renders like this

Turn any photo, sketch, or floor plan into a photoreal render in seconds.